29 viewsThe original 914 brakes had two seized pistons. I couldn't get them out even with vice grips.
|
|
24 viewsSo I picked up a set of BMW 320i brakes. Here is a pic after I disassembled, cleaned them and some temporary paint.
|
|
25 viewsHere they are after I took them apart again, honed the cylinders, cleaned with brake cleaner and removed the temporary paint.
|
|
30 viewsFirst some silver high temp paint.
|
|
29 viewsThen some Dupli-Color caliper paint.
|
|
26 viewsHere they are after they were stripped, cylinders honed and painted with Dupli-Color caliper paint.
|
|
26 viewsThe rebuilt kit.
|
|
26 viewsAll parts laid out.
|
|
31 viewsThe cylinder inner seal in place.
|
|
28 viewsThe dust book attached to the piston.
|
|
25 viewsReady to go back together.
|
|
28 viewsPiston in (pressed in by hand) and the dust book ring in place.
|
|
|
|
